AWC-600 Water Spot Remover TECHNICAL DATA SHEET
AWC-600 Water Spot Remover SECONDARY BOTTLE LABEL PDF File
AWC-600 Water Spot Remover SECONDARY BOTTLE LABEL
AWC-600 Water Spot Remover SAFETY DATA SHEET – English
AWC-600 Water Spot Remover SAFETY DATA SHEET – Spanish
PRODUCT CATEGORY: Solvents & Removers
COLOR: Clear
SCENT: Acidic
DILUTION RATIO: 1 part Water Spot Remover to 3 parts water
DIRECTIONS:
- Rubber gloves, boots, apron and eye protection required.
- Thoroughly wash and rinse vehicle. Do not dry.
- Dilute product 1:3 with water.
- Using a mist sprayer, apply product to the vehicle.
- Do not apply to convertible or vinyl tops.
- Allow to dwell for 1-3 minutes.
- Do not allow product to dry.
- Agitate surface with a wash mitt, soft bug sponge or truck wash brush.
- Use a soft bristle brush for rubber moldings and trim pieces.
- Neutralize #600 Water Spot Remover with #713 Special Cleaner diluted 1:10.
- Rewash and rinse vehicle to remove remaining product residue.
- If necessary, remove remaining spots with a medium abrasive polish.
SURFACE APPLICATIONS:
OEM painted surfaces, bumpers and moldings and chrome plated items.
ADDITIONAL USES:
#600 Water Spot Remover should only be used to remove hard water spots and acid rain from painted surfaces and chrome on automobiles.
HELPFUL TIPS:
Pre-treat convertible tops, unpainted vinyl/rubber trim and moldings with 713 Special Cleaner diluted 1:10 to prevent streaking from #600 Water Spot Remover. Use appropriate safety gear when using this product.