Shop
Showing 1121–1140 of 1414 resultsSorted by popularity
-
Key Cabinets - Key Control, Key Tags - Stock Tags - Key Storage
Key Tags for Zippered Key Case MMF-201500003
Key Cabinets - Key Control, Key Tags - Stock Tags - Key StorageKey Tags for Zippered Key Case MMF-201500003
- Hook and loop replacement key tag can be written on with pencil, pen or permanent marker.
- Fastener on the back of the key tag sticks securely to the hook and loop fabric.
- Write directly on the tag with pencil, pen or permanent marker.
- Ring holder attaches key to tag.
- 12 Pack
SKU: mmf-201500003 -
Key and Stock Tags, Key Tags - Stock Tags - Key Storage
Slotted Rack Key Tags-Assorted Colors MMF-2013004W47
Key and Stock Tags, Key Tags - Stock Tags - Key StorageSlotted Rack Key Tags-Assorted Colors MMF-2013004W47
- 1-1/2″ Sturdy plastic key tags are attached to nickel-plated snap hooks
- Key tags can be written on for identification of keys
- 20 tags per pack
- Colors: Assortment includes five red tags, five yellow tags, five green tags, and five blue tags
SKU: mmf-2013004w47 -
-
-
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Parts, Tornador Tools
Tornador Black Rotator Set ECP-TB-200-RS
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Parts, Tornador ToolsTornador Black Rotator Set ECP-TB-200-RS
ECP-TB-200-RS
OEM Plunger Replacement
The Tornador TB-200RS is a weighted tube assembly for vehicle cleaning tools. It is compatible with Z-020 Tornador Black. Removes stains, spots, and ground-in dirt. A genuine OEM part. Ensures a proper fit when installed in the recommended models.
- Item: Weighted Tube Assembly
- Compatible Models: Z-020 Classic Tornador Black
SKU: ecp-tb-200-rs -
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Parts, Tornador Tools
Tornador Black Cone/Brush ECP-TB-900
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Parts, Tornador ToolsTornador Black Cone/Brush ECP-TB-900
ECP-TB-900
Tornador Upholstery Brush Nozzle Only
Genuine industrial-grade factory replacement part for Tornador cleaning tools. Perfect for your car detailing needs! This inner liquid tube is best used for a Z-010 and/or Z-020. This tube helps assist with a tornador for faster more powerful cleaning. The tornador inner liquid black tube allows double the power of the tornador classic as well as low wear and maintenance, lower air consumption and lower noise emissions. This replacement part are the fastest and easiest way to clean all automotive surfaces.
- Optimal performance
- Clean and dries all hard- to-reach areas
- Does the hard work for you
- Fits: Z-011 and Z-020
SKU: ecp-tb-900 -
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Parts, Tornador Tools
Tornador Black Cone ECP-TB-100
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Parts, Tornador ToolsTornador Black Cone ECP-TB-100
ECP-TB-100
Tornador Classic Nozzle Only, Black
This quality replacement part will get your classic Tornador nozzle up and running in no time. This inner liquid tube is best used for a Z-010 and/or Z-020. This tube helps assist with a tornador for faster more powerful cleaning. The tornador inner liquid black tube allows double the power of the tornador classic as well as low wear and maintenance, lower air consumption and lower noise emissions. This replacement part are the fastest and easiest way to clean all automotive surfaces.
- Replacement part for classic nozzle
- Fits: Z-010 Tornador Classic & Z-020 Tornador Black
SKU: ecp-tb-100 -
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador Tools
ECP-ZV-200 Tornador Velocity Vac
Extractor, Steamer, Tornador, Ozone, Shop Equipment Supplies & Tools, Tornador ToolsECP-ZV-200 Tornador Velocity Vac
ECP-ZV-200
- The ZV-200 Tornador Velocity-Vac is the newest addition to the detailing world from manufacturer Tornador.
- Designed to work with the supercharged Tornador Z-020 Black and a wet/dry vacuum, the Tornador Velocity-Vac totally expands the capabilities of your Tornador Black.
- With a few easy installation steps, your Tornador Black is now ready to tackle even the filthiest interiors.
- The all-in-one cleaning tool is just what you’ve been waiting for!
- The ZV-200 Tornador Velocity-Vac essentially takes three popular detailing tools, and turns it into one!
- Rather than having a separate tool for pressure blowing, interior cleaning, and heavy duty vacuuming, simply attach the ZV-200 Tornador Velocity-Vac to your Tornador Black and go!
SKU: ecp-zv-200 -
Dealer Paperwork, Window Forms & Stickers
KLEER-BAK Border Stickers VER-410 & VER-420
- Clear plastic film seals sticker to inside of window on all four sides.
- Packaged 100 per shrink-wrapped pack.
- Available with Blue Boarder, Red Border, No Border
- Size: 3″ x 4″
- Consecutive Numbering Compatible.
SKU: ver-410-ver-420 -
Buff and Shine Buff Pads, Buff Pads, Wool Pads
Buff & Shine URO-Wool 5″x.75″ Pad BUF-5KW
The Buff and Shine® 6KWC Polishing Pad is part of the Uro-Wool line of pads that fit an All polishers on the market.
- This pad is ideal for cutting purposes during the detailing process.
- The 100% wool pad is the 5″ size option from the Uro-Wool line of polisher pads.
- Use with a Gear Driven or Long Throw DA polisher type.
SKU: buf-5kw -
Buff and Shine Buff Pads, Buff Pads, Foam Pads
Buff & Shine 3″ URO-TEC Foam Pad
- Uro-Tec pads are made open cell euro foam of a higher density that will reduce the pad softening that some technicians have experienced during heavy use with these machines.
- Open cell construction helps to disperse heat during use.
- Blue pad is for compounding and heavy cutting to remove heavy paint defects.
- Maroon is designed to provide medium cutting ability and can be used for heavy polishing.
- Yellow is used for general-purpose polishing to remove minor paint imperfections.
SKU: buf-3-foam-pad -
Backing Plates - Brushes - Parts, Buff and Shine
Buff & Shine 3″ Xtra-Soft Backing Plate BUF-358XS
Constructed with an 1″ thick polyurethane layer, the Thick Flexible Backing Plate can offer dramatically increased flexibility that can make up for the loss of flexibility that is sometimes experienced with thin buffing pads. This allows the technician who loves the performance of thin pads to also enjoy the capability of working contours in the vehicle surface that are otherwise more difficult to reach with traditional backing plates.
You will find that the Thick Flexible Backing Plate allows superior control and distribution of pressure over body style lines. It provides virtually 100% surface contact across contours while reducing the potential for damage to protruding body style edges. The highly-beveled pad edge allows for “working into” the deepest body line recesses.
SKU: buf-358xs -
Backing Plates - Brushes - Parts, Buff and Shine
Buff & Shine 7″ Rigid & Flex Edge Grip Backing Plate BUF-1800
Backing Plates - Brushes - Parts, Buff and ShineBuff & Shine 7″ Rigid & Flex Edge Grip Backing Plate BUF-1800
- Buff & Shine 7″ Heavy Duty Flex Edge Backup Pad (1800) features a stiff and durable center, flex edge, grip backing and standard female 5/8″ x 11 thread connection.
- Fits standard 7.5″ to 9″ Buff & Shine buffing pads as well as other brands of similar size.
- Durable construction and perfectly balanced.
- Features grip backing for quick buff pad attachment and release.
- Hybrid construction of stiff center and flexible edges allows the backing plate to be more versatile for different buffing applications.
SKU: buf-1800 -
Backing Plates - Brushes - Parts, Buff and Shine
Buff & Shine 6″ DA Flexable Backing Plate BUF-658XS
You will find that the Thick Flexible Backing Plate allows superior control and distribution of pressure over body style lines. It provides virtually 100% surface contact across contours while reducing the potential for damage to protruding body style edges. The highly-beveled pad edge allows for “working into” the deepest body line recesses.
SKU: buf-658xs -
Shop Equipment Supplies & Tools, Shop Tools
Malco Proportioner MAL-8135
Four-Button Dispenser is perfect for mixing multiple dilution rates of the same cleaners, washes, degreasers, and dressings or mixing four different products.
Single Button Dispenser allows for automatic proportioning of cleaners, washes, degreasers, and dressings into individual bottles.
- Mounts easily to the wall
- Can be combined with additional units for added versatility
- Can be dialed in for most products
- Easily controlled mix ratios
- Prevents waste and reduces the cost per vehicle
SKU: mal-8135 -
Grit Guard Washing System, Shop Equipment Supplies & Tools
Dual Plate for Grit Guard System GRI-DUALPLATE
Grit Guard Washing System, Shop Equipment Supplies & ToolsDual Plate for Grit Guard System GRI-DUALPLATE
GRI-DUALPLATE
These Diamond plate aluminum connecting plate is perfect for connecting your Wash and Rinse buckets together, and even you wheel bucket.
1 plate is needed to connect 2 buckets.
2 plates is needed to connect 3 buckets together.
SKU: gri-dualplate -
Grit Guard Washing System, Shop Equipment Supplies & Tools
Grit Guard Washboard GRI-GGWB
GRI-GGWB
The Grit Guard Washboard works in conjunction with the Grit Guard Insert in your wash bucket to separate the grit from the mitt! Like it’s sister product, the Grit Guard Insert, the Grit Guard Washboard has NO flat surfaces for dirt or grit to be collected. Contaminants are extracted from cleaning tools while rubbing them on the downward stoke against the Washboard.
Particles such as dirt, grit and grime from your wash mitt are the root cause of scratches and swirls in your vehicles finish. By using the Grit Guard Washboard together with the Grit Guard Insert you are insuring a clean, scratch-free wash mitt every time you go back to the bucket for water.
All of the potentially harmful dirt settles in the bottom of the bucket, keeping it away from your mitt and away from your paint. This simple and cost effective method protects your precious painted surfaces from being scratched and saves your paint from swirl marks and scratches.
SKU: gri-ggwb -
Jump Boxes/Paint Meter, Shop Equipment Supplies & Tools, Shop Tools
JUMPER CABLES CLR-410122
CLR-410122
12 ft 10 GA
Twin Booster Cables
with 250A Clamps12′ 10 GA twin booster cable set is ideal for head-to-head starting of all classes of passenger vehicles. Designed for all-weather use, it TPR cable jacket remains flexible in extreme temperatures and feature an operating temperature range from -40˚C to +80˚C. 250A commercial grade clamps provide strong biting force to penetrate corrosion on battery terminals.
- 12′ length
- 10 GA cable set
- Twin cable design
- 250A clamp set
- All weather rated to -40˚C
SKU: clr-410122
